1.絲桿升降機嚴禁超載和載人使用。必須有專人操作、管理。
2.進入升降機前需將層門、轎門開到底，以避免推車誤撞造成損壞。
3.運送貨物要擺放均勻，不能過于偏載以防止貨物在運行中滑落或倒塌。
4.升降機層門和轎門必須關門到位，否則電氣安全裝置不動作，升降機無法運行。
5.升降機在運行中如按了急停按鈕，必須再按一次，使之復位，否則升降機無法使用。
6.升降機到層作業完畢后，必須把轎門和層門關到位，便于后者使用。
7.操作工到升降機位置后，如果轎廂不在本層時刻按任意運行按鈕做召喚鈴使用，工作層應盡快完成工作。
8.在使用過程中，如發現升降機有異常聲音和不良現象時，應按急停按鈕停止使用，待查明原因排除故障后方可使用。
9.非專業人員不得修理升降機，嚴禁短接各線路和開關以及手動按接觸器和開啟層門。
10.操作工應經常打掃升降機內外，保持各部位清潔。
11.使用時如按運行按鈕，絲桿升降機未動作而電鈴響，請認真檢查各門是否到位及召喚盒上紅色急停按鈕是否誤按。
英文如下：
1 lifts forbidden overload and manned use. There must be a special operation, management.
2 enter the lift before the door, car door opening will end, so as to avoid the cart mistakenly hit damage.
3 delivery of goods should be placed evenly, cannot too slant load to prevent the goods in the operation of the slide and collapse.
4 elevator landing doors must be closed in place, otherwise the electrical safety devices do not move, lift can not run.
5 lifts in operation such as pressed the emergency stop button, must press again, to reset, or lift can not use.
6 lifts to layer after work, must put the car door and landing door closed in place, is convenient to use.
7 operators to lift position, if the car is not in the press the run button layer moment do call bell, working layer should finish the work as soon as possible.
8 in the use of the process, such as found in lift has abnormal sound and undesirable phenomena, should press emergency stop button to stop using, to identify the reasons for troubleshooting before use.
9 non professional personnel not to repair Elevator, no short lines and switches and contactors and manually by opening the floor door.
10 operators should be cleaned regularly lift home and abroad, to keep parts of cleaning.
11 when used as press the run button, elevator action and not the bell rings, please carefully check whether the door in place and call box red emergency stop button is pressed mistakenly.
如需要齒輪加工，蝸輪蝸桿加工，齒條，鏈輪，同步帶輪，尼龍齒輪等減速機配件加工，可以來圖紙或?qū)崢幼稍�，國產進口都可加工。更多相關的產品蝸輪蝸桿，齒輪加工，減速機配件加工，微型擺線針輪減速機，齒輪換向器，蝸輪減速機，絲桿升降機，齒輪馬達，無級變速機, 精密行星減速機，斜齒輪硬齒面減速機，螺旋錐齒輪減速機,平行軸斜齒輪減速機，斜齒輪-蝸輪蝸桿減速機的參數請聯系上海諾廣公司，我們將為你提供完美的服務。
更多絲桿升降機的資訊請點擊瀏覽網站鏈接:http://m.kzkc.com.cn/product/jwm/13.html
